Proaction CJ021 - Operation

CAUTION:
Pull out the cable to the
maximum length indicated with
the yellow mark. Never pull the
cable out to the red mark as the
cable winding mechanism can
be damaged.
76
fig. 5
fig. 6
fig. 7
fig. 8
fig. 9
OPERATION OPERATION
1. Pull out the cable to the desired
length. Do not over extend.
3. Press On/Off Button N to start
the vacuum cleaner. To stop it
press the On/Off Button N again.
The Power Indicator O will
illuminate when the power is on.
See fig. 5.
2. Plug into the mains socket.
Controlling Suction Power
1 Suction Power can be adjusted
using the Handle Suction Control
G. Keep it closed for full suction
and open for reduced suction.
See fig. 6.
2. Slide the Power Regulator Button
Q to adjust the power of the unit.
See fig. 7.
N
Storage
1. When you have switched off and
unplugged the appliance, press
the Cable Rewind Button P to
automatically rewind the cable.
See fig. 8.
Q
G
P
2. Hook the Suction Tube A into the
slot provided at the base of the
Cleaner.
See fig. 9.
A
O
3. Store according to the Safety
Instructions.