1110
PROBLEM CORRECTION
Machine does not work.
The Suction performance is
reduced.
fig. 15
fig. 16
CLEANING THE FILTER
NOTE: We recommend cleaning
the Motor Filter and Exhaust
Filter at the same time at regular
periods.
NOZZLE ACCESSORIES
Cleaning the Exhaust Filter
1. Remove the Exhaust Filter and
clean in warm soapy water. Ensure
the Exhaust Filter is totally dry
before assembly.
See fig. 15.
2. Replace the Exhaust Filter in the
same way.
See fig. 16.
TROUBLE SHOOTING
- Check that the appliance is correctly
plugged in and that the electrical socket
is working.
- Check fuse or breaker switch.
- Take it to the authorized service centre.
- Stop the appliance and unplug it.
- Check the Tubes, Hose and Cleaning
tools are not blocked.
- Check the Dust Bag is not full.
- Check the Filters and clean them.
Exhaust Filter
Crevice Nozzle
Floor Type
Selector
To vacuum corners and slots.
Upholstery Head
Fit the accessories to match your cleaning requirements
Adjust the selectors to fit your
requirement:
To clean upholstery, curtains, etc.
Floor Head
Carpet or rug position:
To clean carpets, rug or smooth
surfaces.
Hard floor position:
To clean tiles, parquet or hard floor.
Exhaust Filter
NOTE:
Never replace wet filters in the
machine as this will create an
electrical hazard.
To Next Page
Loading...