Trim Tabs: The trim tabs can greatly enhance the performance of
your ShockWave. To adjust the angle of the trim tabs, use a large
adjustable wrench to carefully bend the tabs as shown. This
must be done carefully so that you do not damage the transom.
If you would like a calmer, more controlled run, carefully bend
the tabs down
1
/8". If your goal is to go faster and to add excite-
ment, bend the tabs carefully up.
Wake Conditions: It is advisable to run your ShockWave in low
to medium wake conditions to avoid having problems with the
boat overturning. If the conditions are questionable, bend the
trim tabs down a bit to ensure a less likelihood of having the
boat overturn.
10
Section 7: Performance Tips
To Next Page
Loading...
