Step 1. There are 4 plywood boatstand pieces. The 2 short ply-
wood pieces are the ends of the boat stand. Notice that one of
the two short pieces has a channel cut out in the center for the
stuffing box to clear.
Step 2. Attach the 2 long plywood pieces of the interlocking
boatstand to one end of the short plywood pieces. Repeat with
the remaining short plywood pieces.
Step 3. Secure the interlocking boatstand with medium thick
CA or epoxy.
5
Section 1: Building the Boat Stand
• Plywood boatstand pieces (4) • CA or epoxy
Parts Needed Tools and Adhesives Needed
To Next Page
Loading...
