6 of 104 | English
• Never insert ngers or metal objects into the vents and
openings of the dehumidier.
• The appliance shall be installed in accordance with
national wiring regulations.
• The unit’s circuit board(PCB) is designed with a fuse to
provide overcurrent protection. The specications of the
fuse are printed on the circuit board.
SPECIFIC INFORMATION REGARDING R290 REFRIGERANT GAS
――
CAUTION
RISK OF FIRE
WARNING: THE APPLIANCE MUST BE INSTALLED, OPERATED
AND STORED IN A ROOM WITH A FLOOR AREA LARGER
THAN 4M
2
.
• This appliance contains 0.06kg (60g) of R290 refrigerant
gas.
• R290 is a refrigerant gas that complies with the European
directive on the environment.
• Do not puncture any part of the refrigerant circuit.
• Be aware R290 refrigerant is odourless and does not
have the odour normally associated with natural gas and
propane tanks.
• Do not use means to accelerate the defrosting process
or to clean, other than those recommended by the
manufacturer.
• The appliance must be placed in an area without any
continuous sources of ignition such as open ames, gas,
or electrical appliances in operation.
• Do not puncture and do not burn.
• If the appliance is installed, operated or stored in a non-
ventilated area, the room must be designed to prevent
To Next Page
Loading...
