probst VPH-150 - Safety Equipment Checks

Safety
VPH 150
V5
10/01/13
13 / 23
4.9 Checking the safety equipment
The vacuum lifting device has the
following safety equipment:
● Pressure gauge
Checking the
Pressure Gauge:
● Switch on the VPH.
● Place the VPH onto a metal plate, or similar, and suction.
A Valve at - 0,5 bar under-pressure must be reached.
Checking the suction hose
and clamps:
Control and tighten the suction hose and clamps
Safety Advice for the 12-Volt-rechargeable Battery Diaphragm Pump must also be consulted!