7.3 Description
The pump consist of the following parts:
● Robust aluminium casing with a ... to fix it onto the Probst stand.
● Two 12 Volt diaphragm pumps.
● Main switch – on / off function – using the main switch you can switch the pump on or off. By switching
it off, the suction lead is automatically ventilated.
● Fuse holder with fine wire fuse.
● The Vacuum pump is fitted with a charging control system. 3 LEDs show you how charged the battery
is.
● Yellow LED above 14,5 Volt Voltage- Battery is overcharged
● Green LED 11,5 - 14,5 Volt Voltage- Normal
● Red LED under 11,5 Volt Voltage Battery needs charging
On the underpart of the pump you will find a socket. You can charge up the battery in this socket without
having it dismantled.
On the underpart of the pump you will also find a connection for the suction hose. When the suction hose
and the filter are inserted, the other end of the hose is attached to the suction plate.
On the filter element there is an arrow which indicates the air current. Please make sure that the air current
is pointing towards the vacuum pump.
To Next Page
Loading...
