7 Vacuumpump
7.1 General
This vacuum pump is equipped with a rechargeable 12 Volt 6,5 Ah lead battery, and the pump is powered
by an in-built lead battery.
The recharging control system lets you see how charged up the battery is.
7.2 Safety Advice
● The voltage must comply with that stated on the vacuum pump data plate. The pump must only be
powered by a 12 Volt direct current.
● Before working on the pump, including changing the supply hose, remove the plug from the socket.
● The lead wires have to be in perfect condition. Any damaged parts have to be replaced immediately.
● Only use original spare parts.
● Do not plug in the pump to the mains if it is raining or damp.
● When opening covers or removing parts, except for when this can be done by hand, live parts can be
exposed. Connections can also be live.
● Before carrying out any maintenance work, repairs or replacing any parts, the pump must be
disconnected from all power sources if it needs to be opened.
● Do not use the pump in rooms or in surroundings in which gases, fumes or dust are present or could be
present.
● Protect the device for wetness and dampness.
Do not use the pump if safe working conditions cannot be guaranteed. It would not be safe to continue if:
● The pump is clearly damaged.
● The pump no longer works.
● It has been stopped for a long period or in unfavourable conditions.
● It is damaged during transportation.
Never switch the pump on straight away if it is brought in from a cold room to a warm one.
The condensation could damage your pump. Let it come to room temperature without
switching it on.
To Next Page
Loading...
