Maintenance and care
VPH 150
V5
6 Maintenance and care
6.1 Maintenance
To ensure the correct function, safety and service life of the device the following points must be executed in
the maintenance interval.
Take care that for all maintenance services the device is completely shut down!!
MECHNICAL
First inspection after
25 operating hours
● Control and tighten all screws and connection.
(The implementation is only allowed by an expert).
● Tighten all screws and connection (Take care that the tightening torques
according to the property class of the screws are observed).
● Check all joints, bolts, guidance’s and gears for correct function, if
necessary adjust or replace it.
● Check all Grippers ( if available) for signs of wear.
● Grease all slidings ( if available) when the device is in opened position
with a spatula.
Minimum 1x per year
(at rough conditions
shorten the interval)
● Check of all the suspension parts, bolts and straps. Check for corrosion
and safety by an expert.
6.1 Suction plate
Clean all bits, dirt and dust from the suction plate at least
once a day. Replace any damaged or worn-out suction
Plates (splits, holes, distortions) immediately.
Do no use petrol or corrosive fluids which would
destroy the suction hose or make it leaky.
To Next Page
Loading...
