EasyManua.ls Logo

Procom FBD32RT - User Manual

Procom FBD32RT
32 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
VENT-FREE GAS
FIREPLACE INSERT
OWNER’S OPERATION AND
INSTALLATION MANUAL
MODEL FBD32RT
PFS
®
US
WARNING: If the information in this manual is not
followed exactly, a re or explosion may result causing
property damage, personal injury or loss of life.
— Do not store or use gasoline or other ammable va-
pors and liquids in the vicinity of this or any other
appliance.
— WHAT TO DO IF YOU SMELL GAS
• Do not try to light any appliance.
• Do not touch any electrical switch; do not use any
phone in your building.
•
Immediately call your gas supplier from a neighbor’s
phone. Follow the gas supplier’s instructions.
• If you cannot reach your gas supplier, call the re
department.
—
Installation and service must be performed by a quali-
ed installer, service agency or the gas supplier.
WARNING: This appliance is equipped for Natural and
Propane gas. Field conversion is not permitted other than
between natural or propane gases.
Questions, problems, missing parts? Before returning to your retailer, call
our customer service department at 1-866-573-0674, 8:00 am - 4:30 pm CST,
Monday through Friday or email customerservice@usaprocom.com

Table of Contents

Questions and Answers

  • T
    Tara SandovalSep 12, 2025
    Why does my Procom FBD32RT produce a whistling noise when burner is lit?
    • M
      munozamySep 12, 2025
      If your Procom Indoor Fireplace produces a whistling noise when the burner is lit, operate the burner until air is removed from the line and have the gas line checked by your local gas supplier. Check if air passageways on the heater are blocked and observe minimum installation clearances. The burner orifice may be dirty or partially clogged, so clean the burner or replace the burner orifice.
  • J
    Jim AdkinsSep 14, 2025
    Why is there white powder residue forming in my Procom Indoor Fireplace?
    • S
      stephentuckerSep 14, 2025
      If you notice a white powder residue forming within the burner box or on adjacent walls or furniture when using your Procom Indoor Fireplace, turn off the heater when using furniture polish, wax, carpet cleaner, or similar products.
  • J
    Jason BurkeSep 16, 2025
    What to do if there is gas odor during combustion in Procom Indoor Fireplace?
    • J
      James HardySep 16, 2025
      If you notice a gas odor during combustion in your Procom Indoor Fireplace, take apart the gas tubing and remove any foreign matter. Locate and correct all leaks.
  • F
    ffrostDec 3, 2025
    What to do if there is spark but no pilot flame in Procom FBD32RT Indoor Fireplace?

    Summary

    Safety

    Specifications

    Qualified Installing Agency

    Local Codes

    Air for Combustion and Ventilation

    Providing Adequate Ventilation

    Discusses the need for adequate ventilation and defines classifications for air supply.

    Determining Fresh-Air Flow for Heater Location

    Provides a worksheet to calculate required fresh air based on space volume and appliance BTU input.

    Ventilation Air from Inside Building

    Ventilation Air from Outdoors

    Installation

    Minimum Wall and Ceiling Clearances

    Specifies required clearances from combustible materials for safe installation.

    Gas Selection

    Details the process for changing the gas type from propane/LP to natural gas and vice versa.

    Built-in Fireplace Installation

    Connecting to Gas Supply

    Details safety precautions and requirements for connecting the heater to the gas supply.

    Checking Gas Connections

    Provides procedures for testing gas supply piping and heater connections for leaks.

    Installing Logs

    Operation

    Read Before Lighting

    Crucial safety warnings and instructions to follow before attempting to light the appliance.

    Lighting Instructions

    Step-by-step guide on how to safely light the pilot and main burner.

    Manual Lighting Procedure

    Remote Control System

    Thermostat Function

    Inspecting Burners

    Pilot Flame Pattern

    Burner Flame Pattern

    Care and Maintenance

    Main Burner Inspection

    Cleaning Burner Pilot Air Inlet Hole

    Troubleshooting

    Ignitor Problems

    Lists common ignitor issues, possible causes, and corrective actions.

    Pilot Flame Issues

    Addresses problems with pilot flame not appearing or going out after release.

    Burner Ignition and Flame Problems

    Covers issues like burner not lighting, delayed ignition, backfiring, and high yellow flame.

    Odors and Noises

    Residue and Odor Issues

    Replacement Parts

    Warranty

    Procom FBD32RT Specifications

    General IconGeneral
    BrandProcom
    ModelFBD32RT
    CategoryIndoor Fireplace
    LanguageEnglish

    Related product manuals