Prodigy Autocode Reference Guide

Performing a Control Solution Test
Step 2: Press the “M”
button to enter
control solution
mode.
*Test Results will not be
stored in the meter memory.
You will hear: “Your Prodigy Meter is on, Please apply
blood to the test strip”,
You will then hear: “You
are now in Control
Solution Mode.”

Prodigy Autocode Specifications

General

Measurement Range	20-600 mg/dL
Sample Size	0.6 µL
Test Time	6 seconds
Coding	No Coding Required
Battery Type	2 x AAA batteries
Automatic Shutoff	2 minutes
Data Port	USB
Operating Conditions	50-104°F (10-40°C)
Memory Capacity	Up to 450 test results