PRODIM 2017 © Proliner Quick start guide - Training preparation Page 15
11. Maintenance
General care
We advise to regularly clean the Proliner and to keep it dust free, also in storage.
If possible, make use the ocial Proliner backpack and / or ight case.
The measuring wire should also be cleaned on a regular basis (weekly) using the supplied dust-free cloth.
Do not use lubricants, detergents or chemicals!
Always start a measurement rst before cleaning the wire.
This ensures that you hear the signal alarm when the wire is stretched out too far.
We advise to clean the entire wire with two persons.
One person takes the measuring pen and stretches the wire until the alarm starts to beep at the end of the
wire. The other person cleans the wire with the cloth.
If you are alone and you still want to clean the entire wire, make sure that the wire is lying on a clean surface
and cannot get entangled. Never let go of the wire!
Watch the video
For questions, feedback or support,
please contact Prodim.
Check our website for more information:
www.prodim-systems.com
To Next Page
Loading...