EasyManua.ls Logo

Prodys QUANTUM LITE - Quick Quide; II.1 Handheld Codec. Power on

Prodys QUANTUM LITE
26 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Prodys S.L. Tel: +34 91 6896880 Θ Fax: +34 91 6943777 Θ Email: sales@prodys.net Θ Web: www.prodys.com
Page 6
QUICK QUIDE
II.1 Handheld codec. Power On.
The handheld codec is typically used together with the battery bloc engaged at
the bottom side. Operation without the battery is possible if the VDC power
supply is feeding the device meanwhile.
Picture 2: Codec + battery bloc split off
The device is powered on pressing the square push button over the touch
screen for at least 3 seconds. The codec is operable 20s later.
Powering off the device is possible in any circumstance by just pressing the
same button for 8 seconds until the screen turns totally black.
Remark: Following procedures are applicable for the device with factory default
configuration. It might be possible that some procedures are disabled or use
short-cuts enabled by your company codec administrator.
An invitation for login with password is the first screen after start up is shown.
Chapter II

Other manuals for Prodys QUANTUM LITE

Related product manuals