PROEMION CANlink mobile 3611

Need help?

Do you have a question about the PROEMION CANlink mobile 3611 and is the answer not in the manual?

Summary

2. About the Device

2.2. Device Functions

Details available device types, scope of delivery, launch kits, and software accessories.

2.3. Service and Support

3. Safety Information

3.1. Safety Instructions

Provides critical safety warnings regarding operation, electrical hazards, and potential risks.

4. Functionality and Features

4.1. Functions

Describes various functions like CAN-CAN bridge, Bluetooth/WLAN interface, and device operating modes.

4.2. Connectors

4.3. Indicator Elements

4.4. Cables

5. Getting Started

5.1. Installing Software

5.2. Connecting the Device

Guidance on connecting the device, including power supply and battery charging.

5.3. Activation

5.4. Configuring the Device

Steps for configuring the device, including PC connection and communication settings.

5.5. CAN-CAN-Bluetooth;WLAN Bridge

5.6. CAN-Bluetooth Interface

5.7. CAN-WLAN Interface

5.8. Connecting the Device to the DataPlatform

5.9. Mounting the Device

5.9.1. Mounting Orientations

5.9.2. Antenna Positioning

5.9.3. Mounting

5.10. Installation Study

5.10.1. Verification

5.10.2. Validation

6. Operation

6.1. Proemion Configurator

Explains how to configure the device using the Proemion Configurator software.

6.2. Logging Mode

Details how the device logs CAN messages, GNSS data, and internal variables.

6.3. RealTime Mode

Describes transmitting CAN messages and GNSS data bidirectionally in near real-time.

6.4. File Transfer

6.4.1. Transfer User File via the DataPlatform

Step-by-step guide for uploading user files from DataPlatform to CANlink mobile.

6.4.2. Generic File Transfer

6.5. CANopen File Server

6.6. Encrypted Data Transfer

6.7. Important device variables

6.7.1. Positioning

6.7.2. WLAN and Bluetooth

6.7.3. Input;Output Functions and Sensors

6.7.4. Battery

6.7.6. Power management

Explains power management settings for safe shutdown and wake-up conditions.

6.7.7. GeoFence; GeoLeash

6.9. Safe Remote Updates Guideline

6.9.1. Introduction

Introduction to the remote update process and minimizing risks.

6.9.2. Updating Steps

Outlines a step-by-step approach for firmware or configuration roll-outs.

6.9.3. Checking Success

6.10. Configuration update

6.10.1. DataPlatform

Steps for performing configuration updates via the DataPlatform.

6.10.2. CAN

Instructions for updating configuration via the CAN interface.

6.11. Firmware update

6.11.1. DataPlatform

Steps for loading firmware updates remotely via the DataPlatform.

6.11.2. CAN

Instructions for loading firmware updates via the CAN interface.

6.11.3. Micro-USB

6.12. Diagnosis via Micro-USB Port

6.12.1. Recording the Debug Log

6.13. Factory Reset

6.13.1. Factory Reset via CAN

6.13.2. Factory Reset via USB Connector Cable;Diagnosis

6.13.3. Factory Reset via the Start Cable

7. Troubleshooting

7.1. Remedies

Provides solutions for common problems like device not functioning or not receiving signals.

7.1.1. Support Request

7.1.2. Connection Problems to the DataPlatform

7.2. Maintenance