14.Time Setting of Out Arm Delay (Default: 60 sec)
In setup status, use keypad to input [44], then input delay time [01] ~
[99], and then input [#] to confirm. You will hear a long beep and a
voice prompt “setting completed”.
Operating method: [44] [AA] [#]
AA indicates: the alarm delay time 01~99 seconds
For example: set the wireless coding number as 99
Operating method: [44] [99] [#]
LCD display:
Note:
The setting is effective only with the panel keyboard operation.
The operation by remote controller or SMS is immediate arm
without delay.
15.Time Setting of Alarm Delay (Default: 40 sec)
In setup status, use keypad to input [45], then input delay time [01] ~
[99], and then input [#] to confirm. You will hear a long beep and a
voice prompt “setting completed”.
Operating method: [45] [AA] [#]
AA indicates: the code number 01~99
For example: set the wireless coding number as 65
Operating method: [45] [65] [#]
LCD display:
Note:
Alarm delay is effective only when the correspondent zone of
the detector is set as alarm delay zone.
11
16.Alarm Number Setting
In setup state, input [51] ~ [56], then input the voice alarm-receiving
number (mobile number or telephone number), and then press [#] to
confirm. The main unit will make a long beep, the [Signal] indicator will
flicker once, and you will hear “setting completed”, which indicate voice
alarm-receiving number is set successfully.
Operating method: [XX] [YY…YY] [#]
XX indicates: the 1- 6 alarming user number [51] ~ [56]
YY…YY indicates: voice alarm-receiving phone number
For example: set 13811111111 as the first voice call number
Operating method: [51] [13811111111] [#]
LCD display:
Note:
the alarm-receiving number can be maximum 15 digits.
17.Delete Phone Number
In setup state, input [51] ~ [56], and then press [#] to confirm, the main
unit will make a long beep and the [Signal] indicator will flicker once
and you will hear “delete completed”, which indicate the alarming user
number is deleted successfully.
Operating method: [XX] [#]
XX indicates: the 1- 6 alarming user number [51] ~ [56]
For example: Delete the third alarming user number from the system.
Operating method: [53] [#]
LCD display:
18.SMS Receiving Number Setting
SMS Receiving number means when system is alarming, it will send
SMS to this mobile number. You can set maximum 3 SMS numbers.
12
Functions Settings Functions Settings
To Next Page
Loading...
