ProFitter KFA50PF - Replacing Fuse

12
Maintenance (Continued)
REPLACING FUSE
NOTE: The heater is fuse protected. If
your heater fails to ignite, DO NOT
RETURN YOUR HEATER TO THE STORE.
Please follow the simple instructions
below to inspect and change the fuse.
SHOCK HAZARD. To
prevent personal
injury, unplug the power cord before
replacing fuse.
- Unplug heater.
- Remove side cover screws using
medium Phillips screwdriver.
- Disconnect switch wires from power
switch (KFA75PF, KFA125PF,
KFA170PF, KFA210PF Models Only).
- Remove fuse from fuse holder (See
Figure 25).
- Replace fuse.
FIRE HAZARD. To
avoid fire, Do not
substitute with a higher or lower
current rating.
- Replace switch wires to power switch
(KFA75PF, KFA125PF, KFA170PF,
KFA210PF Models Only).
- Replace side cover.
NOTE: Specified fuse rating: AC 125/8A
WARNING
WARNING
ProFitter
TM
Portable Oil-Fired Heaters
ProFitter
TM
Operating Instructions and Parts Manual
For Technical Support or Troubleshooting, Call: 1-877-447-4768, 8:30 am - 4:30 pm CST www.ghpgroupinc.com
Figure 25 – Replacing Fuse
Models: KFA75PF, KFA125PF,
KFA170PF, KFA210PF
Model KFA50PF
Fuse Holder
Fuse
Screw
Side Cover
Power Switch
Switch Wire
Fuse Holder
Fuse
KFA50PF, KFA75PF, KFA125PF,
KFA170PF and KFA210PF
NEVER LEAVE THE HEATER UNATTENDED WHILE BURNING!