18
4. Change the incline of the treadmill as desired.
To change the incline of the treadmill, press the
I
ncline increase or decrease button or one of the
numbered Quick Incline buttons. Each time you
p
ress one of the buttons, the treadmill will gradu-
ally adjust to the selected incline setting.
5. Follow your progress with the displays.
The matrix—When
you select the manual
mode, the matrix will
display a track that rep-
resents 1/4 mile (400
meters). As you exer-
cise, the indicators around the track will appear in
succession until the entire track appears. The track
will then disappear and the indicators will again
begin to appear in succession.
The Calories/Incline
display—This display
will show the approxi-
mate number of calo-
ries you have burned.
The display will also
show the incline of the treadmill for a few seconds
each time the incline of the treadmill changes.
The Time display—
This display will show
the elapsed time. Note:
When an onboard
workout is selected,
the display will show
the time remaining in the workout instead of the
elapsed time.
The Distance
display—This display
will show the distance
t
hat you have walked or
run.
The Speed/Pulse
display—This display
will show the speed of
the walking belt. The
display will also show
your heart rate when
you use the handgrip pulse sensor (see step 6 on
page 19).
The Center display—This display will show work-
out instructions.
Press the Home button to return to the start mode
(see THE INFORMATION MODE on page 23 to
set the start mode). If necessary, press the Home
button again.
When an iFit Live mod-
ule is connected to
www.iFit.com, the iFit
Live symbol near the
top of the display will
light.
When a Nike+ module
is connected to the con-
sole, the Nike+iPod
symbol near the top of
the display will light.
To reset the displays, press the Stop button, re-
move the key, and then reinsert the key.
To Next Page
Loading...
Need help?
General