To Next PageTo Next PageWhy does my ProForm PRO-FORM CROSSWALK 397 831.24843.0 power turn off during use?
The power may turn off during use if the power switch has tripped. If this occurs, wait five minutes, and then press the switch back in. Alternatively, ensure the power cord is securely plugged in. If it is, unplug it, wait five minutes, and then plug it back in.
What to do if my ProForm Treadmill power does not turn on?
First, ensure that the power cord is plugged into a surge suppressor, and that the surge suppressor is plugged into a properly-grounded outlet. Also, after plugging in the power cord, verify that the key is correctly inserted into the console. Finally, check the power switch located on the treadmill frame near the power cord. If the switch protrudes, wait five minutes, and then press it back in.
How to fix ProForm Treadmill walking belt if it is off-center or slips?
If the walking belt has shifted to the left, use the hex key to turn the left idler roller screw clockwise 1/2 of a turn. If the walking belt has shifted to the right, turn the left idler roller screw counterclockwise 1/2 of a turn. If the walking belt slips when walked on, first remove the key and unplug the power cord. Using the hex key, turn both idler roller screws clockwise, 1/4 of a turn.
What to do if ProForm PRO-FORM CROSSWALK 397 831.24843.0 Treadmill incline does not change correctly?
To calibrate the incline, hold down the Stop button and the Speed increase button, insert the key into the console, and then release the Stop button and the Speed increase button. Next, press the Stop button and then press the Incline increase or decrease button. The treadmill will automatically rise to the maximum incline level and then return to the minimum level. If the incline does not begin calibrating, press the Stop button again, and then press the Incline increase or decrease button again.
How to turn off demo mode on ProForm PRO-FORM CROSSWALK 397 831.24843.0?
The console displays may remain lit because the demo mode is turned on. To turn off the demo mode, hold down the Stop button for a few seconds. If the displays are still lit, see THE INFORMATION MODE on page 18 to turn off the demo mode.
General| Model Number | 831.24843.0 |
|---|---|
| Incline | 0-10% |
| Speed | 0-10 MPH |
| Running Area | 18" x 50" |
| Folding | Yes |
| Weight Capacity | 300 lbs |
| Display | LCD |
| Bluetooth | No |
| Cooling Fan | Yes |
| Programs | 16 |
Instructions on connecting the power cord to the treadmill using a surge suppressor.
Step-by-step guide to operating the treadmill in manual mode, adjusting speed and incline.
Instructions and safety precautions for folding the treadmill into storage position.
