10
Circuit du
fluide
frigorigène
Oil(Supplier)
Alternative oil
Discharge gas
temperature
45–100 tr/s (LT)
25-100 tr/s (MT)
-15°C* / + 43°C (the ambient temperature can be -30°C if polar
kit heater is installed)
Water, Water-glycol (MPG / MEG – 60% maxi)
Water circuit
(water cooled
version)
-8°C to 35°C (nominal +7°C / +12°C)
Variable (depend on the capacity)
Pressure drop
(water side)
5 min or longer for on/off cycles
Liquid line temperature standard
receiver pressure settings
* Depending on the ambient temperature the use of the Polar kit should follow the following recommendations:
Ambient Temperature < -15°C Mandatory
Ambient Temperature < +5°C Recommended