SELECTION OF INSTALLATION LOCATION
13
The QUIETCO2OL Air
Cooled is intended for
outdoor installation
– The refrigeration unit must be installed
with an inclination angle 1°or below. If
devices are used in a seismic area, then
the installer must apply all necessary
rules.
– Enough free space all around the
refrigeration equipment should be
provided to facilitate maintenance
operations.
– The heat exchangers must be installed
in locations free of any external dust or
other pollutants from the neighborhood
which could obstruct or clog the coils.
– If devices are used in a corrosive area
(sea side, pollutant gas, etc.), make
sure that appropriate anticorrosion
protection has been provided.
To Next Page
