EasyManua.ls Logo

ProFusion EH-4604 - Locating Heater

ProFusion EH-4604
10 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
4
8. This heater is not suitable for use in corrosive atmospheres such as
marine greenhouses or chemical storage areas.
9.
This heater must be mounted at least 8 feet off the floor. For specific
clearances, please see next page.
Improper installation or failure to follow the procedures
outlined in this instruction manual can result in serious electrical shock.
LOCATING HEATER
Install heater away from traffic areas, maintaining clearances stated in figure 2
(below). The air flow direction should not be restricted (ie. by columns or
machinery). The air flow should wipe exposed walls rather than blowing
directly on them. When more than one heater is used in an area, heaters
should be installed so that the air discharge of each heater supports the air
flow of the others, to provide best warm air circulation as shown in figure 3.
Figure 2

Related product manuals