Progeny JB-70 - Checking System Functions

Recommended Maintenance JB-70
12
Checking System Functions
Important Notice
The following checks must be performed at the installation of the JB-70 Dental X-Ray System and as part
of the recommended maintenance at least every twelve months after installation. Failure to perform these
checks may result in an installation that does not comply with U.S. Radiation Performance Standards 21
CFR Subchapter J.
If the JB-70 Dental X-Ray System does not perform the functions below, see the Troubleshooting
section of this manual or contact Progeny Dental’s Technical Support. Do not use the system until
the problems are resolved.