ress
5. BASIC CONTROLS
5.1. Setting the clock
The clock display will flash to indicate that the time shown is not correct. To set
the clock, proceed as follows:
1. Select the Clock Symbol with the
Parameter selection keys (not
necessary if your microwave oven
is first plugged in or after a power
failure) .
2. Set the hours with Plus and Minus
keys .
3. Confirm the selection with the
Confirmation key .
4. Set the minutes with the Plus and
Minus keys .
5. Confirm the selection with the
Confirmation key .
5.2 Hiding/Displaying the Clock
If the clock display disturbs you, you can hide it by proceeding as follows:
1. Press and hold the Confirmation
key for 3 seconds. The clock will
be hidden but the dots between the
hours and the minutes will flash
once per second.
2. To show the clock again, repeat
the described procedure again.
1
2 3
4
5 6
12 30
1
2 3
4
5 6
1
1
4
1
4
3