EasyManua.ls Logo

Progressive Dynamics PD4635 - User Manual

Progressive Dynamics PD4635
6 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
110197F
Installation and Operation Guide for
PD4600 Series Replacement Converter
LIMITED WARRANTY
I. LIMITED WARRANTY: Progressive Dynamics, Inc. warrants its power control center to be free
from defects in material or workmanship under normal use and service; and limits the remedies to
repair or replacement.
II. DURATION: This warranty shall extend for a period of two years from the original date of purchase,
and is valid only within the continental limits of the United States and Canada.
III. WARRANTY EXCLUSIONS: This warranty specifically does not apply to:
A. Any product which has been repaired or altered in any way by an unauthorized person or service
station;
B. Damage caused by excessive input voltage, misuse, negligence or accident; or an external force;
C. Any product which has been connected, installed or adjusted or used other than in accordance with
the instructions furnished, or has had the serial number altered, defaced or removed;
D. Cost of all services performed in removing and re-installing the power converter; and
E. ANY LOST PROFITS, LOST SAVINGS, LOSS OF USE OF ENJOYMENT OR OTHER
INCIDENTAL DAMAGES ARISING OUT OF THE USE OF, OR INABILITY TO USE, THE
PRODUCT. THIS INCLUDES DAMAGES TO PROPERTY AND, TO THE EXTENT
PERMITTED BY LAW, DAMAGES FOR PERSONAL INJURY. THIS WARRANTY IS IN
LIEU OF ALL OTHER WARRANTIES, INCLUDING IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
IV. PROOF OF PURCHASE: A warranty claim must be accompanied by proof of the date of purchase.
V. CLAIM PROCEDURE: Upon discovery of any defect, Progressive Dynamics, Inc. shall be supplied
the following information at the address listed in this manual:
A. Name and address of the claimant;
B. Name, model and serial number of the product;
C. Application in which product was installed. (Includes manufacturer, model and model year where
applicable)
D. Date of purchase; and
E. Complete description of the claimed defect.
Upon determination that a warranty claim exists (a defect in material or workmanship occurring under
normal use and service,) the converter section shall be shipped postage prepaid to Progressive
Dynamics, Inc. together with proof of purchase. The product will be repaired or replaced and returned
postage prepaid.
Progressive Dynamics Inc.
507 Industrial Rd.
Marshall, MI 49068
service@progressivedyn.com
www.progressivedyn.com
Extended warranties are
available for purchase at
www.progressivedyn.com
Question and Answer IconNeed help?

Do you have a question about the Progressive Dynamics PD4635 and is the answer not in the manual?

Progressive Dynamics PD4635 Specifications

General IconGeneral
BrandProgressive Dynamics
ModelPD4635
CategoryMedia Converter
LanguageEnglish

Summary

LIMITED WARRANTY

LIMITED WARRANTY Details

Progressive Dynamics, Inc. warrants its power control center against defects in material or workmanship.

DURATION of Warranty

Specifies the warranty period as two years from the purchase date within the continental US and Canada.

WARRANTY EXCLUSIONS

Lists specific conditions and damages not covered by the warranty.

PROOF OF PURCHASE Requirement

States that a warranty claim must be accompanied by proof of purchase date.

CLAIM PROCEDURE

Details the information and steps required to submit a warranty claim.

INSTALLATION INSTRUCTIONS

PD4600 Series Converter Replacement Kit Overview

Introduction to the retrofit kit for replacing specific AC to DC power converters.

Critical Installation Safety Precautions

Essential safety guidelines to ensure safe installation and operation.

Parallax;Magnetek Replacement Steps

Detailed removal and installation procedures for Parallax/Magnetek converter models.

Parallax;Magnetek Model 7155 Replacement Steps

Specific removal and installation procedures for Parallax/Magnetek Model 7155.

WFCO Replacement Steps

Detailed removal and installation procedures for WFCO converter models.

Converter Operation and Features

Charge Wizard Operation Modes

Explanation of Boost, Normal, and Storage modes for battery charging.

Wizard Mode Button Functionality

How to manually override and control converter operating modes.

REVERSE BATTERY PROTECTION CIRCUIT

Details on the protection circuit against accidental reverse battery connection.

DC SECTION Panel Features

Description of the DC panel, fuse positions, and LED indicators.

Related product manuals