Progressive Dynamics PD9200 SERIES - User Manual

PD9200 SERIES
OWNERS MANUAL
PROGRESSIVE DYNAMICS, INC.
POWER CONVERTER LIMITED WARRANTY
I. LIMITED WARRANTY: Progressive Dynamics, Inc. warrants its power converter to be free from defects
in material or workmanship under normal use and service; and limits the remedies to repair or replacement.
II. DURATION: This warranty shall extend for a period of two years from the original date of purchase, and
is valid only within the continental limits of the United States and Canada.
III. WARRANTY EXCLUSIONS: This warranty specifically does not apply to:
A. Any power converter which has been repaired or altered in any way by an unauthorized person or service
station;
B. Damage caused by excessive input voltage, misuse, negligence or accident; or an external force;
C. Any power converter which has been connected, installed or adjusted or used other than in accordance with
the instructions furnished, or has had the serial number altered, defaced or removed;
D. Cost of all services performed in removing and re-installing the power converter; and
E. ANY LOST PROFITS, LOST SAVINGS, LOSS OF USE OF ENJOYMENT OR OTHER INCIDENTAL
DAMAGES ARISING OUT OF THE USE OF, OR INABILITY TO USE, THE PRODUCT. THIS
INCLUDES DAMAGES TO PROPERTY AND, TO THE EXTENT PERMITTED BY LAW, DAMAGES
FOR PERSONAL INJURY. THIS WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES,
INCLUDING IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
PARTICULAR PURPOSE.
IV. PROOF OF PURCHASE: A warranty claim must be accompanied by proof of the date of purchase.
V. CLAIM PROCEDURE: Upon discovery of any defect, Progressive Dynamics, Inc. shall be supplied the
following information at the address listed below:
A. Name and address of the claimant;
B. Name and model of the power converter;
C. Name, year and model of the recreational vehicle in which the power converter
was installed;
D. Date of purchase; and
E. Complete description of the claimed defect.
Upon determination that a warranty claim exists (a defect in material or workmanship occurring under normal
use and service,) the power converter shall be shipped postage prepaid to Progressive Dynamics, Inc. together
with proof of purchase. The power converter will be repaired or replaced and returned postage prepaid.
Progressive Dynamics Inc.
507 Industrial Rd.
Marshall, MI 49068
269.781.4241, Fax 269.781.7802
service@progressivedyn.com
www.progressivedyn.com
TM
109821D

Progressive Dynamics PD9200 SERIES Specifications

General

Brand	Progressive Dynamics
Model	PD9200 SERIES
Category	Media Converter
Language	English

Summary

Progressive Dynamics Inc. Power Converter Limited Warranty

Limited Warranty

Warrants the power converter to be free from defects in material or workmanship under normal use.

Duration of Warranty

Warranty extends for two years from the original purchase date within the continental US and Canada.

Warranty Exclusions

Lists specific conditions not covered, such as misuse, unauthorized repair, or accidental damage.

Proof of Purchase

A warranty claim must be accompanied by proof of the date of purchase.

Claim Procedure

Outlines the information required and steps to submit a warranty claim.

Features of the Inteli-Power 9200

Integrated Charge Wizard

Microprocessor monitors battery voltage to provide optimal charging and long-term maintenance.

Reverse Battery Protection Circuit

Protects the converter from damage if the battery is accidentally connected backwards.

Short Circuit Protection

Senses short circuits and limits or reduces current to protect the unit.

Thermal Protection

Decreases power output during over-temperature conditions to prevent overheating.

Overvoltage Protection

Shuts down the unit if input voltage exceeds a preset limit to prevent damage.

General Information and Operation

Charging Modes Explained

Details the Boost, Normal, and Storage modes for battery charging and maintenance.

Boost Mode (14.4 Volts)

Returns the battery to 90% of full charge in approximately 8 hours.

Normal Mode (13.6 Volts)

Safely completes the battery charge, requiring about 78 hours for full charge.

Storage Mode (13.2 Volts)

Maintains charge with minimal water loss, requiring about 100 hours for full charge.

General Operation Details

Normal Mode Operation

Output voltage is 13.6 VDC, providing good charging rates and low water usage.

Boost Mode Operation

Output voltage increases to 14.4 VDC to rapidly recharge the battery.

Storage Mode Operation

Output voltage reduces to 13.2 VDC for minimal water usage after periods of inactivity.

Equalization Mode Operation

Increases voltage to 14.4 VDC for 15 minutes every 21 hours to reduce sulfation.

Manual Switch and Remote Pendant

Allows manual override of converter modes and provides status indication.

Installation and Troubleshooting

Installation Recommendations

Provides guidelines for mounting and ensuring adequate ventilation for the converter.

Important Installation Notes

Highlights crucial points like terminal torque, wire gauge, and weatherproofing.

Troubleshooting Guide

Lists common problems, their possible causes, and recommended actions.

Pre-Troubleshooting Checks

Specifies essential checks to perform before considering converter replacement.

Input;Output Specifications

Model Specifications

Lists input voltage, wattage, output voltage/amperage, dimensions, and weight for various models.

Wiring and Grounding

Illustrates connection points, including grounding lugs, reverse battery protection, and DC distribution.

Safety: Risk of Fire

Emphasizes correct chassis bonding wire usage to prevent fire hazards.