Project Source MT-25005L - TECHNICAL SPECIFICATIONS; Electrical and Flushing Specifications; Seat, Drying, and Fan Specifications; Product Dimensions and Consumption

Printed in China
21
SPECIFICATIONS
Water pressure range
Water pressure control
Water temperature control
Water heating power
Safety device
Rear wash
Front wash
Seat heating power consumption
Seat temperature control
Seat fuse
Drying power consumption
Drying temperature
Safety device
Fan
power consumption
Fan/Deodorant
Rated Voltage
Maximum Power
Rated Power
Power Cord Length
Flushing
Seat
Temperature
Drying
Fan
Remote Control
Product Dimension
Product Weight
Average Water Consumption
4 level adjustment: ambient temperature, 91.4°F, 96.8°F, 102.2°F
4-level adjustment: 95°F, 107.6°F, 118.4°F, 129.2°F (Air
temperature depends greatly on ambient temperature,
so values here are only for reference)
1280W (at inlet water temperature 41°F, and outlet water
temperature and flow set at the top level)
0.1 MPa (dynamic)-0.75MPa (static) (flow no less than 18L/min)
4-level adjustment: ambient temperature, 91.4°F, 96.8°F, 102.2°F
Temperature sensing and control system, burn-out prevention
device, over-temperature protection device, and water and
electricity separation system.
40W
Temperature sensing and control system/fuse
200W
Recoverable temperature switch/fuse
3W
Catalyst deodorizing box
Yes
LWH: 26.77×16.54×20.31(in)
88LB
4.0L
AC 120V, 50-60Hz
1200W(at inlet water temperature 59°F±32.9°F)
4-ft 11.05-in
4-level adjustment
1600W
0.4-0.7L/min(water pressure≥0.15MPa)
0.4-0.7L/min(water pressure≥0.15MPa)