Projecta AC040 - Product Overview; Frequently Asked Questions

9
FREQUENTLY ASKED QUESTIONS
Q. How do I know if the battery is charged?
A. The charger will indicate full on the display. Alternatively use a Battery Hydrometer
(Projecta Part No. BH100). A reading of 1.250 or more in each cell indicates a fully
charged battery.
Q. I have connected the charger properly but the Charger won’t start charging?
A. In some cases batteries can be flattened to the point where they have very little or no
voltage. This can occur if a small amount of power is used for a long time, for example
a map reading light is left on for a week or more. Projecta 8 Stage chargers are
designed to charge from as little as little as 2.0 Volts.
If the voltage is lower than the voltages stated above use a pair of booster cables to
connect between two batteries to provide more than 2.0 Volts to the battery being
charged. The charger can then start to charge the battery and the booster cables can
be removed.
PRODUCT OVERVIEW
Spark free
& polarity
protected
Weatherproof IP65
P/No. AC040 P/No. AC080
Fused wiring harness
or battery clips
Interactive
LCD screen
Automatic charging
60
225
68
250