Projecta IP2000 User Manual

MOUNTING INSTRUCTIONS
Intelli-Wave inverters are designed for indoor, out of weather use only. During
operation, the inverter should be in a dry, cool and well-ventilated area as close to
the batteries as possible, but not in the same compartment as the batteries. Ensure
the inverter is away from flammable materials and fumes.
The inverter end plates include a mounting flange for easy mounting. If permanently
fixed, the inverter should be mounted to a suitable horizontal or vertical panel, with
at least 10cm clearance from the end plates to provide adequate ventilation for the
cooling fan.
Part No. Inverter Dimensions
Length Width Height
IP2000 478mm 250mm 105mm
6
ON
2000W Pure Sine Wave
OFF
VOLTS ECOWATTS
LOAD%
SAFETY
SWITCH
TEST
OFF
ON
6.5mm mounting holes

Projecta IP2000 Specifications

General

Brand	Projecta
Model	IP2000
Category	Inverter
Language	English