Projectiondesign F1+ User Manual

RS232 and LAN
communication protocol

Projectiondesign F1+ Specifications

General

Brand	Projectiondesign
Model	F1+
Category	Projector
Language	English

Summary

RS232 and LAN Communication Protocol

Setting Up LAN Communication

Setting the IP Address

Procedure for setting the projector's IP address for LAN communication.

Connecting to the Projector via LAN

Steps to physically connect the projector to the LAN and access its configuration website.

Setting Up RS232 Communication

Connecting to the Projector via RS232

Instructions for establishing a physical RS232 connection between the host and projector.

Sending and Receiving Binary Packets

About the Binary Protocol

Explains the 32-byte binary protocol structure, packet composition, and byte numbering.

SET Operations

Details on SET operations for controlling projector settings like brightness and contrast.

GET Operations

Details on GET operations for acquiring projector status like lamp usage hours.

Increment and Decrement Operations

EXECUTE Operations

DESCRIPTOR Operations

Sending and Receiving ASCII Commands

ASCII Command Structure and Overview

Overview, message body structure, and mnemonics for ASCII commands.

ASCII Command Modifiers and Addressing

Details modifiers, addressing mechanisms, and acknowledge/response formats.

Supported ASCII Commands and Examples

Lists all supported ASCII commands, their functions, and provides usage examples.

Appendix B: Binary Packets in Hexadecimal Values

Appendix C: RS232 Daisy-Chaining

RS232 Daisy-Chaining Protocol Overview

RS232 Address Modes

Auto Address Mode

Fixed Address Mode

RS232 Daisy-Chaining Examples

Appendix D: Adjusting Custom Color Temp Using RS232

Choosing Custom Color Temperature

Adjusting Color Temperature with RS232