Prolife PA3 Backlight - Inserting the Batteries; Putting the Digital Blood Pressure Monitor into Operation

7
EN
4 PUTTING THE DIGITAL BLOOD PRESSURE
MONITOR INTO OPERATION
4.1. INSERTING THE BATTERIES
1. Insert the batteries (4 x size AA, 1.5 V), thereby observing the indicated polarity.
2. If the battery warning icon appears in the display, the batteries are
empty and must be replaced by new ones.
ATTENTION
After the battery warning icon
appears, the device is blocked until the
batteries have been replaced.
Please use AA long-life or alkaline 1.5 V batteries. The use of 1.2 V accumula-
tors is not recommended.
If the blood pressure monitor is left unused for long periods, please remove
the batteries from the device.
DISPLAY
Time and dateUser selection
Battery
warning symbol
Systolic value
Pressure units
Diastolic value
Heart symbol
Memory symbol Heart arrhythmia indicator
Air discharge
Air pump-up
Memory set
number
Traffic light display
Pulse