EN
2. Press the TIME button again. The display now switches to the current date,
during which the first character (month) blinks. The corresponding month
can now be entered by pressing the MEMORY button.
3. Press the TIME button again. The last two characters (day) are now blinking.
The corresponding day can now be entered by pressing the MEMORY button.
4. Press the TIME button again. The display now switches to the current time,
during which the first character (Hour) blinks. The corresponding hour can
now be entered by pressing the MEMORY button.
5. Press the TIME button again. The last two characters (Minutes) now blink.
The exact time can now be entered by pressing the MEMORY button.
6. After the settings, press the Time
Button. Indicatorus «MmHg»
will blink. Press the Time button
again to TIME to complete
the setup device. The setting
is confirmed and the clock starts
running. On the screen the
current time is displayed.
DATE DATE
DATE DATE
TIME TIME
TIME TIME
TIME
To Next Page
Loading...
