ProLights ECLIPSEFS - Setup; Avanced

15
ECLIPSEFS
3.12 SETUP
You can change the parameters for the device by following these steps:
Temperature
Through the Max Temperature function can be displayed the temperature inside the xture, near the lamp.
• Press the MODE button so many times until the display shows SETUP, then press the button ENTER.
• Press the UP/DOWN button to scroll through the menu, then select Temperature and press the ENTER
button.
• Press UP/DOWN to scroll through the menu, and then select one of the following settings:
- Temperature °C/°F - To choose the desired temperature unit: Fahrenheit /Celsius.
- Max Temperature - To display the maximum temperature inside the xture, near the lamp.
• Press the ENTER button to conrm your choice.
• Press the MODE button to go back or to meet the waiting time to exit the setup menu.
Screen
You can change the following parameters related to the display, following the same procedure:
• Press the button MODE so many times until the display shows SETUP, then press the button ENTER.
• Select Screen through the buttons UP/DOWN, then press the button ENTER.
• Press UP/DOWN to scroll through the menu, and then select one of the following settings for the dis-
play and press the ENTER key to display it.
- Back Light - Backlight display Auto O. This feature allows you to automatically turn o the backlight
after a specied time that you can set using the arrow buttons. To have the display or set a value of
O~99 min to turn o the display after the amount of time you choose.
- Flip Display - Orientation of the display. This function allows you to rotate the display 180° to get a
better view of the display when the unit is hanging upside down. Select Yes to activate or No to dis-
able this function.
• Press the ENTER button to conrm your choice.
• Press the MODE button repeatedly to exit the menu and save changes.
Fixture
You can change the parameters for the device by following these steps:
• Press the button MODE to enter the menu mode.
• Press UP/DOWN button to select the SETUP. Press the ENTER button to conrm.
• Press UP/DOWN button to select the desired option and press the ENTER button to conrm:
- Fan Mode - Fan Speed. Select the fan speed (Auto Speed /High Speed) using the UP / DOWN button.
- Hibernation - To set the hibernation of the xture (Disable/Min(1~99) using the UP / DOWN button.
- LED Frequency - To adjust the frequency of the LEDs. Select the frequency (600Hz - 1200Hz - 2000Hz - 4000Hz
- 25kHz) using the UP / DOWN.
- Theatre - To set the theatre mode. Select Yes to activate, No to deactivate.
• Press the ENTER button to conrm your choice.
• Press the MODE button repeatedly to exit the menu and save changes.
3.13 ADVANCED
To enter in advanced functions mode, proceed as follows:
Dimmer
• Press the button MODE so many times until the display shows ADVANCED, then press the button ENTER.
• Press the UP/DOWN button to scroll through the menu, then select Dim curve and press the ENTER but-