Proline GR800 - Appliance Operation; Turning the Appliance On and Off; Selecting Operating Modes; Setting the Temperature

9


OPERATION
Plugtheapplianceintothemainssocket.Theappliancewillenterthestandbystate.

TurningON
Press toturntheapplianceon.Press  againtoenterthestandbystate.

Modeswitch
RepeatedlypressMODE toselectthedesiredworkingmode:auto,cooling,dehumidificationorfanonly.
NOTE:TheAUTOmodecanonlybeselectedusingtheremotecontrol.

Theindicatorofyourselectedmodewillilluminateorappear.

Controlpanel
Remotecontrol

Settingthetemperature
Repeatedlypress+/−tosetthetemperature.
Thedisplaywillshowthetemperatureyousetincool(
)mode.
Adjustabletemperaturerange:
30°Cmax.
16°Cmin.


Downloaded from www.vandenborre.be