Proline PAC1800 - Continuous drain hose; Bottom drain plug with cap

NOTE:
Make sure the hose is secure so there are no leaks. Direct the hose toward the drain, making sure
that there are no kinks that will stop the warter øowing. Place the end of the hose into the drain and
make sure the end of the hose is down to let the water øow smoothly. When the continuous drain hose
is not used, ensure that the drain plug and knob are installed örmly to prevent leakage.
When the water level of the bottom tray reaches a predetermined level, the appliance will beeps and the
display will show "P1" . At this time the cooling/dehumidiöcation process will immediately stop.
However, the fan motor will continue to operate (this is normal). Carefully move the appliance to a drain
location, remove the bottom drain plug and let the water drain away. Reinstall the bottom drain plug
and restart the machine until the "P1" disappears. If the error repeats, call for service.
NOTE: Be sure to reinstall the bottom drain plug örmly to prevent leaka
ge before using the appliance.
Remove the
drain plug.
Continuous
drain hose
Bottom drain plug
with cap
EN
30