Proline PAC1800 - SPECIFICATIONS; Product fiche; Error codes

ERROR CODES
E0 – EEPROM (Electrical Erasable Read-Only Memory) error
E1 – Room temperature sensor error.
E2 – Evaporator temperature sensor error.
E3 – Condenser temperature sensor error.
E4 – Display panel communication error.
EC – Refrigerant leakage detection malfunction.
Protection code:
P1 – Bottom tray is full. Connect the drain hose and drain the collected water. If protection repeats, call
for techinical assistance.
NOTE:
When one of the above malfunctions
occurs, turn the unit OFF, and check for any obstructions.
Restart the unit, if the malfunction is still present, turn OFF the unit and unplug the power cord. Contact
the service agents or a similar qualiöed person for service.
SPECIFICATIONS
Product fiche
Trade mark Proline
Model PAC1800
Energy efficiency class A
Description Symbol Value Unit
Rated capacity for cooling P
rated
for cooling 2,0 kW
Rated power input for cooling P
EER
0,8 kW
Rated Energy efficiency ratio EER
d
2,6
ü
Power consumption in thermostat-off
mode
P
TO
ü
W
Power consumption in standby mode P
SB
0,5 W
Electricity consumption of single duct
appliances
Q
SD
0,8 kWh/h
Energy consumption 0,8 kWh per 60 minutes, based on
standard test results. Actual energy consumption will
depend on how the appliance is used and where it is
located.
EN
33