PROLiNK IPS Series - Current and Battery Management

English
Specification6
EN12
Model
Line Mode
IPS1202 IPS2402
Capacity
Nominal Battery Voltage
VA/W
Input
Output
Eciency
Nominal Voltage
Normal Frequency
Voltage
Frequency
Follow the Utility
Follow the Utility
Follow the Utility
>95% (full R load, battery full charged)
15ms Typical, 40ms Max.
230VAC (+10%/ - 18%)
50/60 Hz (auto detection)
Modified sine-wave
>80%
1min@ >110%, 20 s@> 120%, 0s@>150%
3 stage charging
(2) UN
20A (default),
0/10/15/25A (selectable)
13.7VDC
16VDC
15A (default),
0/5/10/20A (selectable)
27.4VDC
32VDC
2.5kg 2.6kg
Discharge, over charged, over loading,
short circuit, over temperature protection
220-240VAC
40-70 Hz (auto sensing)
Voltage Range
Wide mode: 90VAC-280VAC (default)
Narrow model: 170VAC-280VAC
1200VA / 1000 W
12VDC 24VDC
2200 VA / 1800 W
Eciency
Charging Algorithm
Floating Charging Voltage
Over Charging Voltage
AC Charge Current
Overload Protection
Protection
Transfer Time
Battery Mode
Battery Charger (Powered by AC)
Total # of Inverter Receptacles
309.5*96*244 mm
Inverter Status Display
Low battery, Overload, Fault
0°C to 55°C
Yes
Yes
5 to 95% Non condensing
Dimension (W*H*D)
Weight
Physical
Indicators
Audible Alarms
Operating Temperature
Operating Relative Humidity
Warning Diagnostics
Environmental
Auto-charger
Auto-restart
Management
Output
Voltage
Frequency
Output Waveform
Output Waveform