Prologix GPIB-USB Controller User Manual

Prologix GPIB-USB Controller User Manual
4/19/2011 3
Change Log
April 18, 2011 Added ++lon command description.
Sept 14, 2009 Added ++savecfg command descripion. Corrected maximum value
of read_tmo_ms to 3000 ms.
April 21, 2009 Added ++status command description. Updated ++addr, ++spoll
and ++trg command descriptions to include secondary address.
Added section on binary data transmission.
Mar 1, 2008 Updated ++trg command description.
Dec 22, 2007 Updated USB command terminator description and read_tmo_ms
command description.
Jul 9, 2007 Fixed typo in ++mode command description. Thanks Mike Schulz!
Jul 7, 2007 Added change log.
Renamed PERIPHERAL mode as DEVICE mode in line with
other GPIB literature.
Jul 5, 2007 Initial version.

Prologix GPIB-USB Controller Specifications

Supported Standards and OS

supported_os	Windows 98/2000/XP/Vista, Mac OS 8/9/X, Linux, FreeBSD
supported_standards	IEEE 488.1, IEEE 488.2, USB 1.1, USB 2.0
unsupported_gpib_commands	PARALLEL POLL, PASS CONTROL

Power

power_source	USB bus powered
voltage	+5V
current	100 mA (max)

Weight and Dimensions

length	2.5 in.
width	2.5 in.
height	1.0 in.
weight	3 oz.