Prolux PLCC430BN - Introduction

5 / 25
Introduction
The C430BN is an easy and safe machine to use. This manual helps you to get started and
explains the operation and maintenance procedure. You will be pleasantly surprised by the fast
and effective use of the battery-operated C430BN.The batteries must be fully charged before use.
Please refer to the user manual of the class | battery charger for correct procedure.
This manual is intended for those who work with the C430BN and/or perform daily maintenance.
The manual must be read in full before the first actions. This manual describes the correct method
of use, Safety measures, maintenance and transport.
Intended use of the product
The C430BN is a specialized machine for scrubbing hard floor surfaces in door. It is designed
for daily cleaning purpose.
Non-intended use of the product
Non-intended use can have consequences for the safety of operators and bystanders and will void
the warranty on the product.
 NEVER operate the C430BN near flammable dusts, liquids or vapors.
 NEVER operate the C430BN when flammable or poisonous liquids like gasoline, oil acids, or other
volatile Substances are on the floor.
 DO NOT fill the C430BN with any flammable detergent. ONLY use the water-based cleaning solutions.
 DO NOT use water that exceeds 113 °F/45°C. Using water above this temperature will void the tank
warranty.
 DO NOT use cleaning solutions with pH below 3 or above 11in order to prevent damage to sensitive
components.
 DO NOT use the C430BN outdoors or on uneven surfaces.
 DO NOT operate this C430B over electrical floor outlets in order to avoid electrical shock.
 NO RIDERS! Do not carry passengers on top of the C430B.
 DO NOT use the C430B as stepladder or platform.
 DO NOT store the C430B outside in order to avoid damage to electronic components.
 ONLY use manufacturer-Supplied parts for maintenance.
 KEEP AWAY from children! The C430B is a professional cleaning machine to be used by trained adults
only.
Using life
Each C430BN is guaranteed to operate for one year. The wear on brushes and squeegee heavily
depends on the roughness of the surface. They need to be checked regularly.
ensure proper and safe operation throughout the life of the C430BN, the machine must be
checked every 500 hours by an authorized partner;