Attaching the Flexible Hose to the Vacuum
Attach the flexible hose to the vacuum before strapping the unit on.
1. To connect the flexible hose into the hose inlet, insert the end of the flexible hose into the
hose inlet and press firmly until the hose feels secure in the inlet.
2. Put the main canister on in the same way you would put on a backpack. Then adjust the
shoulder straps and hip belt to the proper size to fit. Turn on the switch by reaching behind
you and flipping the switch to the ON position.
3. To connect the hose to the telescopic wand, simply line up button lock with the indentation
on the wand and push until they click together.
4. To remove the wand press the black button (10 on page 11 of this manual) and pull apart
carefully.
Manual Suction Control
Your vacuum cleaner includes a manual variable suction control on the flexible hose
handle. The suction power can be adjusted by moving the suction regulator to the desired
position between open and closed. The more open the valve is, the more it will reduce the
suction. (Fig 10)
To Next Page
Loading...
