ProMariner ProTech1240iPLUS User Manual

Pro
M
ariner
®
Series
Owner's Manual and Installation Guide
Professional Mariner, LLC
200 International Drive, STE 195
Portsmouth, New Hampshire 03801
TEL: 603-433-4440
FAX: 603-433-4442
www.promariner.com
Pro
M
ariner
®
IMPORTANT NOTICE
This manual contains important safety and operating instructions for ProTech-i Models: 1210i, 1215i,
1220i, 1225i, 1230iPlus, 1240iPlus and 2420iPlus. Please save and read all safety, operating, and
installation instructions before installing or applying AC power to your ProTech-i Series Battery Charger.
Models Part No. Amperage No. of Banks Volts
ProTech1210i 63310 10 Amps 2 Banks 12
ProTech1215i 63315 15 Amps 3 Banks 12
ProTech1220i 63320 20 Amps 3 Banks 12
ProTech1225i 63325 25 Amps 3 Banks 12
ProTech1230iPLUS 63331 30 Amps 3 Banks 12
ProTech1240iPLUS 63341 40 Amps 3 Banks 12
ProTech2420iPLUS 63420 20 Amps 3 Banks 24
UL 03/07 B
specifications subject to change without notice
Visit ProMariner Online at www.promariner.com, for a Complete
Selection of Quality Marine Products...
Here are just a few:
Visit frequently, we are always adding new products for your
boating enjoyment!
ProMite Series - Recreational Grade Waterproof Marine Battery Chargers
ProSport Series - Heavy Duty Recreational Grade Waterproof
Marine Battery Chargers
ProTournament Series - Professional Grade Tournament
Waterproof Marine Battery Chargers
ProNautic C
3
Series All Digital Dry Mount Battery Chargers
Digital Mobile Charge In-Transit Chargers
Battery Maintainers
AC Plug Holders
Battery Isolators
Isolation Transformers
Galvanic Isolators and Monitored Systems
Corrosion Control Products
Waterproof Marine Binoculars
Gold Plated Fuses and Holders
A Complete Line of Hand Held Test Meters
Online Technical Support and Service Support
Model Number: Serial Number: Date of Purchase:
PLEASE RECORD YOUR:
Advanced Electronic Fully Automatic, 4-Stage On-Board Battery Charger
Please call our Customer Care Department at 800-824-0524 from 8:30 am to 5pm Eastern Time
for any warranty, service or installation assistance. Thank you - ProMariner Customer Care
Your Satisfaction is Important to Us!
Do not return this product to retailer or dealer for any service or warranty requirements.
Pro
Tech i
Automatic Marine Battery Charger
L
I
M
I
T
E
D
L
I
F
E
T
I
M
E
R
E
P
A
I
R
TWO YEAR
WARRANTY
Certified To: UL 1236 SB
c UL To: CSA C22.2 No. 107.2-01
Ignition Protected
Designed and Constructed to:
ABYC A-31
FCC Class B
Serial number is located inside the ProTech-i Charger. To view, simply unscrew and slide off the top cover of the DC Power end cap.

ProMariner ProTech1240iPLUS Specifications

General

Output Current	40A
Cooling	Fan Cooled
Weight	10 lbs
Number of Banks	2
Charging Algorithm	Multi-Stage
Charging Stages	Bulk, Absorption, Float
Output Voltage	12V
Input Voltage	120VAC
Battery Type	AGM, Gel
Operating Temperature	0°C to 50°C (32°F to 122°F)
Safety Features	Over Temperature Protection, Short Circuit Protection

Summary

Warranty Information

Important Notice: FCC Class B Part 15 Notification

FCC Class B Part 15 notification regarding potential interference and mitigation steps.

Customer Service & Warranty

Factory Service Center & Technical Support

Contact information for ProMariner's technical support and service center.

Cautions, Warnings & Safety Instructions

Important Safety Instructions

Critical safety warnings for operating and installing the ProTech-i Series charger.

Risk of Fire, Explosion or Electrical Shock

Specific warnings about fire, explosion, and electrical shock hazards.

Periodic Maintenance and Frequently Asked Questions

Periodic Maintenance

Guidelines for regular maintenance checks of the battery charger.

Frequently Asked Questions

Answers to common user queries about the ProTech-i Series charger.

Trouble Shooting and Periodic Maintenance

Trouble Shooting

Step-by-step guide for diagnosing and resolving issues with the ProTech-i Series charger.

Charger Maintenance

Regular checks and upkeep procedures to ensure optimal charger performance.

Cautions, Warnings & Safety Instructions Continued

Personal Safety Precautions

Personal safety measures to follow when working near batteries and the charger.

Installation

DC Grounding Installation

Instructions for correctly grounding the DC system components.

Drip Shield Installation

Steps for installing the drip shield to protect the charger from moisture.

Applying AC Power

Procedure for connecting and applying AC power to the charger.

AC Connections

AC Wiring and Fuse/Breaker Requirements

Guidelines for proper AC wiring and minimum protective fuse or circuit breaker sizes.

Setup and Operation

Initial Setup and Power Application

Steps for applying AC power and observing initial charger status indicators.

Programmable Switches

Information on setting battery type and absorption timer switches.

Understanding Battery Types

Battery Types and Charging Profiles

Details on Flooded, AGM, and GEL batteries and their respective charging profiles.

DC Installation Details

Battery Cable Connections

Instructions for connecting battery cables with over current protection.

24 Volt DC Common Ground Installation

Specific wiring instructions for 24 Volt ProTech-i Series chargers.