Need help?Do you have a question about the promethean SSIUW-P1 and is the answer not in the manual?
General| Model | SSIUW-P1 |
|---|---|
| Type | Ultra Short Throw Projector |
| Display Technology | DLP |
| Zoom Ratio | Fixed |
| Aspect Ratio | 16:10 |
| Speaker | 10W |
| Resolution | 1920x1200 (WUXGA) |
| Connectivity | HDMI, VGA, USB |
| Weight | 5.6 kg |
Provides critical safety instructions and warnings for operating the projector.
Details warnings about eye safety, electrical hazards, and product handling.
Specifies operational instructions, cleaning advice, and environmental limitations.
Lists all items included in the projector package for unpacking and inspection.
Describes the main unit of the projector and its numbered components.
Details the buttons and indicators on the projector's control panel.
Illustrates and labels all available input and output ports on the projector.
Explains the functions of each button on the projector's remote control.
Guides users on how to connect the projector to computers and notebooks.
Provides instructions for connecting various video sources to the projector.
Details the steps to power on the projector and select signal sources.
Explains the procedure to turn off the projector and its cooling cycle.
Describes the meaning of different LED indicators and warning lights.
Guides on using the projector's elevator feet to adjust image height.
Explains how to use the focus switch to achieve a clear image.
Provides a table and diagrams for adjusting image size based on distance.
Details the functions of the projector's control panel buttons and LEDs.
Explains the functions of each button on the remote control.
Guides on navigating and using the projector's on-screen display menus.
Explains how to adjust Color Mode, Wall Color, Brightness, and Contrast.
Details adjustments for Aspect Ratio, Phase, Clock, and H. Position.
Covers Language, Menu Location, Closed Caption, and VGA Output settings.
Details how to adjust Speaker, Line Out, Microphone, Mute, and Volume.
Covers Logo, Logo Capture, Auto Source, and Input settings.
Details Laser Hours Used (Normal/ECO) and Laser Power Mode.
Guides on enabling 3D, 3D Invert, 3D Format, and 1080p@24.
Covers Brightness and Color Temp adjustments for blending mode.
Explains network status, DHCP, IP Address, Subnet Mask, Gateway, DNS, MAC Address.
Guides on controlling the projector via a web browser interface.
Explains AP configuration and connecting a laptop via Wi-Fi.
Describes the web management interface for projector information and LAN settings.
Guides on configuring email alerts for projector status and events.
Explains how to set a password for web management access.
Details controlling the projector via Crestron flash UI.
Describes the RoomView software for central monitoring and control of projectors.
Provides instructions for cleaning or replacing the projector's dust filter.
Lists supported resolutions and frequencies for VGA analog signals.
Lists supported resolutions and frequencies for extended wide timing signals.
Lists supported resolutions and frequencies for component video signals.
Lists supported resolutions and frequencies for HDMI digital signals.
Lists supported resolutions and frequencies for HDMI 1.4a 3D timing.
Specifies communication parameters for RS232 serial port connection.
Illustrates the wiring diagram for RS232 connection between computer and projector.
Lists RS232 commands, ASCII codes, and their functions.
Provides FCC compliance information and safety notices for the projector.
Outlines operating conditions, Canadian notices, EU declarations, and disposal instructions.
Details Class 2 and Class 4 laser warnings and precautions for safe operation.
To Next Page
