Propress PRO290 - Water and Steam Coming From Filler Cap; Buzzing When Steamer Is Not Empty; Burning Smell When Water Level Runs Low

19
WATER AND STEAM COMING FROM FILLER CAP
Probable Cause Solution

or the hose is kinked or damaged.
Steamer nozzle being used at low
level causing condensation to
form in the hose.


poles and hose and empty excess water through

damage. Restrictions in the hose will cause safety


hose so condensation can run back into the steamer.

BUZZING WHEN STEAMER IS NOT EMPTY
Probable Cause Solution
Thermal sensor is damaged or
element heavily scaled.

boiler as directed in 6.2 Cleaning your Steamer.

6.3 Descaling your Steamer. If this does not correct
problem call your dealer to arrange service.
We recommend the use of Propress Descaler which is available from your local dealer.
BURNING SMELL WHEN WATER LEVEL RUNS LOW
Probable Cause Solution
Element is scaled and surrounded
by sediment.

boiler as directed in 6.2 Cleaning your Steamer.

6.3 Descaling your Steamer.
Keeping your steamer clean will extend the life of the element.