20 perating & Safety Instructions
NOZZLE HANDLE VERY HOT WHEN IN USE
Probable Cause Solution
Loose securing screw in handle. Using appropriate screwdriver, check that screw
in handle is tight.
If screw continually turns you will need to order a new hose set.
EXCESS WATER FROM STEAM NOZZLE
Probable Cause Solution
heat up fully before use, or nozzle
is being used with holes lined up
in vertical orientation. Screw in
handle loose.
fabric see 4.3 Using your Steamer and also see
5. Tips on Use. Check that screw in hose handle
is tight.
Refer to full user manual for further details.
8. PROPRESS TROUBLESHOOTING MATRIX
To Next Page
Loading...