Technical Specications
Recommended separation distances between portable and mobile RF communications
equipmentandtheTENS+EMSSUPERDUO
Rated maximum
output power of
transmitter
Separationdistanceaccordingtofrequencyoftransmitter
M
W
0,01 N/A
N/A
N/A
N/A
N/A
0,12
0,38
1,2
3,8
12
0,23
0,73
2,3
7,3
23
0,1
1
10
100
150kHzto80 80MHzto800MHz 800MHzto2,5GHz
TheTENS+EMSSUPERDUOisintendedforuseinanelectromagneticenvironment
in which radiated RF disturbances are controlled. The customer or the user of the
TENS+EMSSUPERDUOhelppreventelectromagneticinterferencebymaintaininga
minimum distance
betweenportableandmobileRFcommunicationsequipment(transmitters)andthe
TENS+EMSSUPERDUOasrecommendedbelow,accordingtothemaximumoutput
powerofthecommunicationsequipment.
For transmitters rated at a maximum output power not listed above, the recommended separation
distancedinmeters(m)canbeestimatedusingtheequationapplicabletothefrequencyofthe
transmitter, where P is the maximum output power rating of the transmitter in watts (W) according
to the transmitter manufacturer.
NOTE1At80MHzand800MHz,theseparationdistanceforthehigherfrequencyrangeapplies.
NOTE 2 These guidelines may not apply in all situations. Electromagnetic propagation is aected
byabsorptionandreectionfromstructures,objectsandpeople.