A moving part of the treadmill
is stuck and therefore the
motor is unable to rotate
properly.
Inspect moving parts of the
treadmill to ensure that they are
operating correctly. Check the
motor, listen for strange noise
and check for a burning smell.
Replace the motor if necessary.
0006 ERROR: Motor
Abnormality
The motor wire is not
connected or the motor is
damaged.
Check motor wires to see if the
motor is connected. If the wire
has been punctured or damaged,
you will need to replace it. If the
problem is not rectified, you may
need to replace the motor
0008 ERROR:
Control Board
Abnormality
The control board is not
connected.
Check the upper and middle
wires to see if the control board is
connected. If the wire has been
punctured or damaged, you will
need to replace it. If the
problem is not rectified, you may
need to replace the control board.
0009 ERROR:
Inversion error
The treadmill sets upright or
not placed horizontally
Adjust the treadmill and place it
horizontally.
The wires of the control board
can not connect well, replace a
new control board.
0010 ERROR:Motor
Abnormality
The motor is damaged or a
moving part of the treadmill is
stuck and therefore the motor
is unable to rotate properly.
Inspect moving parts of the
treadmill to ensure that they are
operating correctly.
Replace the motor if necessary.
To Next Page
Loading...
