ProScan PLCD3271A-D - Basic Operation; Power on;off; Input Source select; Basic OSD Menu operation

10
Power on/off
1. Connect to the power supply with the power cord.
2. -To turn on the TV
Press POWER button on the TV or remote control.
-To turn off the TV
Press POWER button on the TV or remote control.
Input Source select
Press INPUT button on the TV set or SOURCE button on the remote
OK button on the remote control to enter.
Note: Before you select the input source, make sure the
connections are prepared.
Basic OSD Menu operation
Use button to select the main menu, and press OK button to enter the submenu.
Use button to select.
▼ button to select the function item, press button to
or press button to enter the submenu.
* (Press MENU button to return to the upper menu.)
* (Press EXIT button to exit the menu display.)
Note1: Only when you input the suitable signal, the relevant items can be activated.
Note2: Please operating the OSD menu according to hint on the bottom of the banner.
Main menu
Picture
Sound
Channel
Parental
Setup
Others
Submenu
(Picture menu
for example)
Hint---you should operate the OSD menu according to the hint.
Press MENU button to display the OSD menu as below:
Basic Operation
Basic Operation
Press OK button
control to display input source menu, and use CH+/- button on the TV set
▼ button on remote control to select the input source, press