How to turn on ProScan Speakers?
If your ProScan Speakers are not turning on, ensure the AC/DC adapter is correctly connected to both the unit and the wall outlet. Also, check if the unit is in standby mode. If it is, press and hold the Standby/Source button on the unit or press the power button on the remote control to turn it on.
Why is the Bluetooth connection failing on my ProScan Speakers?
If you're having trouble with the Bluetooth connection on your ProScan Speakers, the external device might be too far away. Try moving the Bluetooth device closer to the unit. Also, ensure that you have properly paired the unit with the Bluetooth device according to the pairing procedures.
Why is there no sound coming from my ProScan PSB3200-FD-PL?
If there's no sound from your ProScan Speakers, there might be several reasons. First, check if the volume is at the minimum; if so, increase it using the VOL + button. Also, ensure that the connected device is playing and its volume is set to a high level. Finally, verify that the input source is correct by pressing the Standby/Source button on the unit or the SOURCE button on the remote to select the appropriate mode.
How to fix sound distortion or rattle in ProScan PSB3200-FD-PL?
If you're experiencing sound distortion or rattling with your ProScan Speakers, it's likely that the volume level is too high. Try reducing the volume using the VOL - button on the unit. Also, lower the volume on the paired or connected device.
Device compliance with FCC Rules, subject to two conditions regarding interference.
Equipment tested for Class B limits, designed for residential installations, may cause interference.
Ensure 2-3 inches of space around the soundbar for proper ventilation to prevent heat hazards.
Steps for securely mounting the soundbar on a wooden wall.
Steps for securely mounting the soundbar on a brick wall.
Identifies indicators, speakers, and remote sensor on the front of the soundbar.
Details the input jacks (AUX IN, LINE IN, DC IN) on the rear of the soundbar.
Shows the buttons (Standby/Source, Play/Pause, Volume) on the top of the soundbar.
Description of each button on the Proscan soundbar remote control.
Instructions for removing the insulation tab and installing the battery for the first time.
Important safety guidelines and warnings for using and handling batteries.
Steps for connecting power, turning on/off, and adjusting volume and mode.
Guide for pairing the soundbar with Bluetooth devices and normal operation.
Instructions for connecting and listening to audio sources using the AUX IN jack.
Instructions for connecting and listening to audio sources using the LINE IN jacks.
Guide to diagnose and resolve common issues like no power, no sound, or remote control problems.
Details the warranty period, coverage, and conditions for the product.
Outlines conditions and damages not covered by the product warranty.
Instructions for submitting the product for warranty repair, including required documents and contact information.
To Next Page
General
