ProScan PSB3200-FD-PL - BLUETOOTH PAIRING AND CONNECTION; Pairing and Connecting Bluetooth Devices

BLUETOOTH PAIRING AND CONNECTION
For first time use or re-pairing, pair the unit to an external Bluetooth (BT) device
as follows:
1. Power ON the u nit as previously explained.
3. Power ON the external BT Device and select Bluetooth to enter into search
( For details on pairin g procedures, plea se refer to the u se r's m a nua l of your BT
Device.)
~ Press the
11
2. Press the Standby/Source button on the unit or press the SOURCE button
~
button to pause. Press again to resume normal playing.
on remote control repeatedly until the indicator turns Blue, and a voice tone
sounds "Bluetooth Mode".
mode. when appears, click it to start pairing.
PROSCAN
After paired, the indicator will stop blinking and a voice tone sounds "Paired".
" "
4. During playing:
~ Press the or button to skip tracks.
~
~ Press the VOL - or VOL + button to adjust volume level.
Normal operation after first pairing:time
1. Power on the unit and select the Bluetooth mode as above stated.
2. Activate the Bluetooth function on external Bluetooth device.
4. Play the music as above stated.
3. Wait a few seconds until the unit automatically connect to the external
Bluetooth device.