26
WAN Section
Fill up the information in the circled section in order to complete setting up your VPN router as a router device.
1. WAN IP and WAN Netmask
Fill up the IP address and the netmask of WAN.
2. Protocol
Nine options are available for this setup:
Disable
EoA
EoA + NAT
IPoA
IPoA + NAT
PPPoA
PPPoA + NAT
PPPoE
PPPoE + NAT
3. WAN ENCAP
Choose either “LLC” or “VC MUX” for WAN encapsulation.
4. WAN VPI/VCI
Define the values of VPI and VCI.
To Next Page
Loading...
