Need help?Do you have a question about the Proscend M302-L and is the answer not in the manual?
General| Model | M302-L |
|---|---|
| Category | Network Router |
| WAN Ports | 1 |
| LAN Ports | 1 |
| Ethernet Ports | 2 |
| Wireless Speed | 300 Mbps |
| Power Supply | 12V DC |
| Cellular Technology | 4G LTE |
| Operating Temperature | -20°C to 70°C |
| VPN Support | Yes |
| Firewall | Yes |
| Wireless Standard | IEEE 802.11b/g/n |
| Wireless Standards | IEEE 802.11b/g/n |
| Antennas | 2 |
Lists the key features and capabilities of the Industrial 4G LTE Cellular Router.
Details the technical specifications including hardware, software, and environmental ratings.
Explains the status indicated by different LED lights on the router.
Describes the 10/100 Mbps Ethernet LAN interfaces and their RJ45 connectors.
Details the serial port configuration and pinout for console access.
Guides users on how to insert and remove SIM cards from the router.
Explains how to access the router's web-based management interface.
Describes the main parts of the web configurator interface: Title Bar, Navigation Panel, and Main Window.
Displays status of SIM card, modem, operator, IMSI, phone number, and band.
Shows the configured IPv4 and IPv6 DNS server addresses.
Displays assigned IPv4 and IPv6 addresses for the Ethernet LAN.
Shows location information like latitude, longitude, altitude, and date from GPS.
Allows configuration of router time, date, time zone, and Daylight Savings.
Enables control of logging records and remote log server configuration.
Configures alarm inputs (SMS, VPN/WAN disconnect) and outputs (SMS, SNMP trap, Email).
Allows configuration of IPv6 DNS server settings for the WAN connection.
Configures LTE settings like Auto/4G/3G/2G modes, Lock LTE Band, and MTU.
Configures GPS settings and selects NMEA data types for reporting.
Manages dual SIM connectivity, priority, roaming, and retry settings.
Configures LAN IPv4 address, IP mask, and DHCP server settings.
Configures LAN IPv6 settings, including type, address assignment, and DHCP server.
Allows configuration of static routes for network traffic paths.
Configures RIP protocol for routing information exchange between routers.
Provides settings for configuring OpenVPN connections, including server, client, and custom modes.
Allows configuration of IPSec tunnels with general settings, encryption, and authentication.
Configures port forwarding rules to allow external access to internal services.
Configures the DMZ host settings to expose a device to the internet.
Sets up IP filtering rules based on protocol, source/destination IP, and port.
Configures SNMP settings for network monitoring and management.
Configures TR069 client settings for remote device management.
Configures Dynamic DNS settings for updating IP addresses with domain names.
Displays router identification details like model, MAC, firmware, and IMEI.
Configures router name, passwords, and user authority levels.
Configures SSH server settings for secure remote system access.
Provides instructions for upgrading the router's firmware.
Performs ping tests to diagnose network connectivity to a host.
Performs traceroute to diagnose network path to a host.
Explains the router's support for IPv4/IPv6 dual-stack networking.
Guides on setting up OpenVPN server and client configurations using certificates.
Provides detailed installation steps for setting up a TR069 Server using GenieACS.
Demonstrates an MQTT topology test case with message sending and receiving scenarios.
Shows an IP routing topology and an example of configuring static routes.
To Next Page
